Basit öğe kaydını göster

dc.contributor.authorYücel, Aysu Handeen_US
dc.contributor.authorYılmaz, Alpayen_US
dc.contributor.authorBakkal, Mustafaen_US
dc.contributor.authorKuzu, Ali Taneren_US
dc.date.accessioned2023-11-19T16:49:32Z
dc.date.available2023-11-19T16:49:32Z
dc.date.issued2023-11-27
dc.identifier.citationYücel, A. H., Yılmaz, A., Bakkal, M. & Kuzu, A. T. (2023). Tribo-corrosion behavior of electroplating, nitrocarburizing, and QPQ processes on barrel finishing. Materials Testing, 65(11), 1713-1720. doi:10.1515/mt-2023-0056en_US
dc.identifier.issn0025-5300en_US
dc.identifier.issn2195-8572en_US
dc.identifier.urihttps://hdl.handle.net/11729/5797
dc.identifier.urihttp://dx.doi.org/10.1515/mt-2023-0056
dc.description.abstractIn this study, the effects of nitrocarburizing, QPQ, and Cr coating on the surface properties of 32CrMoV12-10 gun barrels are discussed. Hardness measurements, pin-on-disc tests, and anodic polarization tests were performed to examine the hardness values, wear resistance, friction coefficient, and corrosion resistance. The hardness of the specimen treated with QPQ was found to be the highest. Comparing the hardness profiles, it was observed that the casing depth of the nitrocarburized sample was shallower than that of the QPQ-treated sample. The pin-on-disc test revealed that the nitrocarburized sample exhibited a high coefficient of friction, while the Cr-coated sample showed the lowest coefficient of friction. Analyzing the Tafel polarization curve, it was determined that the nitrocarburized and QPQ-treated specimens demonstrated similar levels of corrosion resistance. However, it can be noted that the QPQ-treated specimen had a slightly lower corrosion rate.en_US
dc.language.isoenen_US
dc.publisherWalter de Gruyter GmbHen_US
dc.relation.ispartofMaterials Testingen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectElectroplatingen_US
dc.subjectGun barrelen_US
dc.subjectNitrocarburizingen_US
dc.subjectQPQen_US
dc.subjectSurface treatmenten_US
dc.subjectAustenitic stainless-steelen_US
dc.subjectWear behavioren_US
dc.subjectMicrostructureen_US
dc.subjectCorrosion rateen_US
dc.subjectCorrosion resistanceen_US
dc.subjectCorrosive effectsen_US
dc.subjectFrictionen_US
dc.subjectHardnessen_US
dc.subjectPolarizationen_US
dc.subjectWear resistanceen_US
dc.subjectBarrel finishingen_US
dc.subjectCorrosion behaviouren_US
dc.subjectCr coatingsen_US
dc.subjectGun barrelsen_US
dc.subjectHardness measurementen_US
dc.subjectNitrocarburizeden_US
dc.subjectPin-on-disc-testsen_US
dc.subjectPolarization testsen_US
dc.subjectTribo-corrosionen_US
dc.titleTribo-corrosion behavior of electroplating, nitrocarburizing, and QPQ processes on barrel finishingen_US
dc.typeArticleen_US
dc.description.versionPublisher's Versionen_US
dc.departmentIşık Üniversitesi, Mühendislik ve Doğa Bilimleri Fakültesi, Makine Mühendisliği Bölümüen_US
dc.departmentIşık University, Faculty of Engineering and Natural Sciences, Department of Mechanical Engineeringen_US
dc.authorid0000-0001-5519-7240
dc.authorid0000-0001-5519-7240en_US
dc.identifier.volume65
dc.identifier.issue11
dc.identifier.startpage1713
dc.identifier.endpage1720
dc.peerreviewedYesen_US
dc.publicationstatusPublisheden_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.institutionauthorKuzu, Ali Taneren_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.indekslendigikaynakScience Citation Index Expanded (SCI-EXPANDED)en_US
dc.identifier.wosqualityQ2
dc.identifier.wosqualityQ2en_US
dc.identifier.wosWOS:001092236700011
dc.identifier.wosWOS:001092236700011en_US
dc.identifier.scopus2-s2.0-85175477885en_US
dc.identifier.doi10.1515/mt-2023-0056
dc.identifier.scopusqualityQ2en_US


Bu öğenin dosyaları:

Thumbnail

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster