Başlık için Makine Mühendisliği Bölümü / Department of Mechanical Engineering listeleme
Toplam kayıt 79, listelenen: 61-79
-
Production of M1, M2 and M3 mirrors for DAG project (Belgium, Russia). Current status
(SPIE-Int Soc Optical Engineering, 2018)This paper describes the technology of production and testing of mirrors for DAG Telescope (Doge Anadolu Gozlemevi) produced by Belgium Company AMOS. JSC LZOS fulfils works on production and testing of three mirrors: primary ... -
Project management and status update for DAG (Eastern Anatolia Observatory) the 4 meter VIS/IR optical telescope
(SPIE-Int Soc Optical Engineering, 2018)The new 4 m Turkish telescope, DAG (East Anatolian Observatory, Fig. 2), will be located on the summit of the mountain Konakli-Karakaya, at an altitude of 3170 m, near the city of Erzurum, Turkey. First light is expected ... -
Project management of DAG: Eastern Anatolia Observatory
(SPIE, 2016)The four meter DAG (Eastern Anatolia Observatory in Turkish) telescope is not only the largest telescope in Turkey but also the most promising telescope in the northern hemisphere with a large potential to offer scientific ... -
A quasi-one-dimensional bubbly cavitating flow model and comparison with experiments
(European Turbomachinery Soc-Euroturbo, 2011)A bubbly cavitating flow model is constructed for unsteady quasi-one-dimensional and two-dimensional nozzle flows. In each case, the system of model equations is reduced to evolution equations for the flow velocity and ... -
A refinement of asymptotic predictions and full numerical solution of helicopter rotor noise in the far field
(Multi-Science Publ Co Ltd, 2012-09-01)The asymptotic analysis of Parry and Crighton [1] for propeller noise in the far field, which is based on Hanson's formulation [2] of the FW-H equation, is refined to second order by Laplace's method [3] for evaluating ... -
Self optimizing ABS control algorithm with application
(Institute of Electrical and Electronics Engineers Inc, 2015)A self optimizing control algorithm is applied to the ABS control problem where the algorithm accomplishes to maximize friction potential of the tires during braking in unknown road conditions. Simulation studies are ... -
Semianalytical solution of unsteady quasi-one-dimensional cavitating nozzle flows
(Springer, 2014-06)Unsteady quasi-one-dimensional bubbly cavitating nozzle flows are considered by employing a homogeneous bubbly liquid flow model, where the nonlinear dynamics of cavitating bubbles is described by a modified Rayleigh-Plesset ... -
Shocks in quasi-one-dimensional bubbly cavitating nozzle flows
(Springer Berlin Heidelberg, 2013-01-01)Stationary and propagating shock waves in bubbly cavitating flows through quasi-one-dimensional converging-diverging nozzles are considered by employing a homogeneous bubbly liquid flow model, where the nonlinear dynamics ... -
A source seeking algorithm with application to a quadcopter model
(Nova Science Publishers, 2019-01-01)A novel extremum seeking (ES) algorithm is developed and its performance is tested on a quadcopter type unmanned aerial vehicle (UAV) model. The motivation of the paper is to develop an ES algorithm that results no ... -
Status of the Focal Plane Instrumentation (FPI) Project of the 4 m DAG Telescope
(SPIE, 2016-08-09)DAG (Eastern Anatolia Observatory in Turkish) will be the newest and largest (4m) observatory of Turkey in both optical (VIS) and near-infrared (NIR) Owith its robust observing site infrastructure. The telescope is designedOto ... -
Sıcak dövme kalıplarına infrared (kızılötesi) yöntemi ile ön ısıtma uygulanmasına yönelik deneysel ve teorik analiz
(Makina Tasarım ve İmalat Derneği, 2020-09-19)Sıcak dövme işlemi, üretim teknolojisinin önemli bir parçasınıoluşturur. Sıcak dövmede uygulanan ısı enerjisi ile parçanın akmadayanımı azalır böylelikle şekil verme kabiliyeti artarak daha karmaşıkgeometrili parçaların ... -
A thermo-mechanical model of drill margin-borehole surface interface contact conditions in dry drilling of thick CFRP laminates
(Elsevier Ltd, 2020-04-23)Dry drilling of thick carbon fiber reinforced polymer (CFRP) laminates requires careful selection of process parameters in order to obtain acceptable borehole surface quality. Complex contact conditions between the drill ... -
Ti6Al4V Alaşımının talaşlı imalatı sırasında termal kamera ile sıcaklık ölçümü ve sonlu elemanlarla modellenmesi
(Süleyman Demirel Üniversitesi Mühendislik Fakültesi, 2019-06-26)Talaşlı imalat en yaygın kullanılan imalat yöntemlerinden biridir. Talaşlı imalatta en önemli problemlerin başında yüzey bütünlüğünü, parça toleransını ve takım ömrünü dolayısıyla maliyeti etkilemesi nedeniyle kesme sıcaklığı ... -
Transient multi-domain thermal modeling of interrupted cutting with coated tools
(Springer Science and Business Media Deutschland GmbH, 2021-09)Interrupted cutting operations, such as milling, produce fluctuating tool temperatures which directly affect the process outputs. Thus, prediction of cutting tool temperatures enables process planning, selection of materials ... -
TROIA adaptive optics system for DAG Telescope
(SPIE, 2020-12-13)This paper presents the specifications of TROIA-TuRkish adaptive Optics system for Infrared Astronomy system, the science rationale for these specifications, and description of the site technical and environmental conditions ... -
TROIA Adaptive optics system for DAG telescope; assembly and laboratory performance prior to on-sky assessment
(SPIE, 2022-08-29)In this article, we describe the current status of the development of TROIA* a pyramid wavefront sensor based adaptive optics system designed for DAG, a new 4 m telescope located in Eastern Anatolia, Turkey. The wavefront ... -
Turkey's next big science project: DAG the 4 meter telescope
(SPIE-INT Soc Optical Engineering, 2014)The DAG (Turkish for Eastern Anatolia Observatory) 4-m telescope project has been formally launched in 2012, being fully funded by the Government of Turkey. This new observatory is to be located on a 3170 m altitude ridge ... -
Wind disturbance cancellation for smaller alt-azimuth telescopes
(Universidad Nacional Autonoma de Mexico, 2019-10)This study focuses on eliminating unknown amplitude wind disturbance for 2-DOF alt-azimuth configuration small telescopes. An adaptive controller is designed to overcome wind disturbance as a set and forget system. The ...