Behaviour of steel cushions subjected to combined actions
Göster/ Aç
Tarih
2018-02Yazar
Yüksel, ErcanÖzkaynak, Hasan
Khajehdehi, Arastoo
Güllü, Ahmet
Smyrou, Eleni
Bal, İhsan Engin
Karadoğan, Hüseyin Faruk
Üst veri
Tüm öğe kaydını gösterKünye
Yüksel, E., Karadoğan, H. F., Özkaynak, H., Khajehdehi, A., Güllü, A., Smyrou, E. & Bal, İ. E. (2018). Behaviour of steel cushions subjected to combined actions. Bulletin of Earthquake Engineering, 16(2), 707-729. doi:10.1007/s10518-017-0217-4Özet
Mild steel is relatively low-cost and easily accessible material to fabricate some structural members. It would be a significant advantage if seismic energy dissipaters that are used in structures constructed in the earthquake prone areas, could also be produced on site. In this paper, a promising seismic energy dissipater made of mild steel, so-called steel cushion (SC) is presented. It is provided experimental and analytical responses of SCs subjected to bi-axial loadings. SC rolls under the lateral loading that allows relocation of the plasticized cross-section. Henceforth, SC dissipates considerable amount of seismic energy. A series of tests were performed to achieve experimentally the behavior of SC subjected to longitudinal and transversal loading. Finite Element Models (FEMs) were also generated to reproduce the experimental backbone curves and to predict the bi-directional response properties for discrete transversal forces and plate thicknesses. Closed-form equations were derived to determine yield and ultimate forces and the corresponding displacements as well as location of the plasticized sections. The behavior of SC could either be projected by the FEMs with the exhibited parameters or by means of the proposed closed-form equations and the normalized design chart.
Kaynak
Bulletin of Earthquake EngineeringCilt
16Sayı
2Koleksiyonlar
İlgili Öğeler
Başlık, yazar, küratör ve konuya göre gösterilen ilgili öğeler.
-
Measurement and assessment of fatigue life of spot-weld joints
Ertaş, Ahmet Hanifi; Vardar, Öktem; Sönmez, Fazıl Önder; Solim, Zafer (Asme-Amer Soc Mechanical Eng, 2009-01)Spot-weld joints are commonly used to fasten together metal sheets. Because fatigue fracture is the most critical failure mode for these joints under fluctuating loads, understanding their fatigue failure behavior and ... -
One-dimensional cutting stock problem with divisible items: a case study in steel industry
Tanır, Deniz; Uğurlu, Onur; Güler, Aslı; Nuriyev, Urfat (Işık University Press, 2019)This paper considers the one-dimensional cutting stock problem (1D-CSP) with divisible items, which arises in the steel industries. While planning the steel cutting operations, each item can be divided into smaller pieces, ... -
Structural analysis of steel truss and masonry bridge interaction: a case of Ali Fuat Pasha bridge in Sakarya, Türkiye
Akşar, Bora; Özdemir, Muhammed Alperen; Tutar, Ali İkbal; Çakır, Ferit (2023-10-02)Restoration of historical structures using new materials and techniques is widespread worldwide. In these applications, relatively new materials such as steel, concrete, reinforced concrete (RC), or composite are generally ...