Başlık için İnşaat Mühendisliği Bölümü / Department of Civil Engineering listeleme
Toplam kayıt 65, listelenen: 4-23
-
Acoustic and structural design of a highway noise barrier
(Institute of Physics Publishing, 2020-05-18)Highway noise barriers are designed to mitigate the effects of traffic noise along the highway. Noise barriers primarily block the direct path of the sound between the source on the highway and the receiver exposed to the ... -
Analysis of the benefits, challenges and risks for the integrated use of BIM, RFID and WSN: a mixed method research
(Emerald Group Publishing Ltd, 2023-07-11)Purpose The purpose of this study is to identify, classify and prioritize the benefits, challenges and risks for the integrated use of building information modeling (BIM), radio frequency identification (RFID) and wireless ... -
Analytical and numerical aspects of the dissipative nonlinear Schrödinger equation
(Işık University Press, 2016-02-15)In this paper various analytical and numerical aspects of the dissipative nonlinear Schrodinger equation (d-NLS equation) are discussed. Decaying solitary wave type solutions derived by Demiray is reviewed and a new ... -
Analyzing the benefits and challenges of building information modelling and life cycle assessment integration
(Springer, 2020)Previous studies show that the architecture, engineering and construction (AEC) industry contributes up to 1/3 of global GHG emissions. With the aim of mitigating negative impacts of AEC industry on the natural environment, ... -
Assessment and enhancement of SAR noncoherent change detection of sea-surface oil spills
(IEEE, 2018-01)Oil spills are one of the most dangerous catastrophes that threaten the oceans. Therefore, detecting and monitoring oil spills by means of remote sensing techniques that provide large-scale assessments is of critical ... -
An automatic calibration procedure of driving behaviour parameters in the presence of high bus volume
(Faculty of Transport and Traffic Engineering, 2019-11)Most of the microscopic traffic simulation programs used today incorporate car-following and lane-change models to simulate driving behaviour across a given area. The main goal of this study has been to develop an automatic ... -
Behaviour of steel cushions subjected to combined actions
(Springer, 2018-02)Mild steel is relatively low-cost and easily accessible material to fabricate some structural members. It would be a significant advantage if seismic energy dissipaters that are used in structures constructed in the ... -
Co-registration of 3d point clouds by using an errors-in-variables model
(Copernicus Gesellschaft MBH, 2012-08-25)Co-registration of point clouds of partially scanned objects is the first step of the 3D modeling workflow. The aim of co-registration is to merge the overlapping point clouds by estimating the spatial transformation ... -
Compressive spectral method for the simulation of the nonlinear gravity waves
(Nature Publishing Group, 2016-02-25)In this paper an approach for decreasing the computational effort required for the spectral simulations of the fully nonlinear ocean waves is introduced. The proposed approach utilizes the compressive sampling algorithm ... -
Compressive spectral renormalization method
(Işık University Press, 2018-09-09)In this paper a novel numerical scheme for finding the sparse self-localized states of a nonlinear system of equations with missing spectral data is introduced. As in the Petviashivili's and the spectral renormalization ... -
Compressive split-step Fourier method
(Işık University Press, 2015-02-09)In this paper an approach for decreasing the computational effort required for the split-step Fourier method (SSFM) is introduced. It is shown that using the sparsity property of the simulated signals, the compressive ... -
Coupled influence of content, gradation and shape characteristics of silts on static liquefaction of loose silty sands
(Elsevier Sci Ltd, 2017-10)Static liquefaction is a challenging problem of geotechnical engineering as its consequences are generally catastrophic when they occur on site. Previous laboratory studies focused on various factors that could influence ... -
Cyclic behavior of reinforced concrete cladding panels connected with energy dissipative steel cushions
(Elsevier Ltd, 2019-06-15)Precast concrete structures show damage after the destructive earthquakes and indicate that the connections of reinforced concrete (RC) cladding panels might be inadequate. RC cladding panels greatly increase the lateral ... -
Dalgalardan enerji üretme teknolojisinin yirminci yüzyıl başında Türkiye’deki yansımaları üzerine bir çeviri
(İstanbul Üniversitesi, 2015-06-01)Okyanus ve deniz dalgalarından enerji üretme fikri 1800’lerin başlarında yaygınlaşmaya başlamıştır. 1973’e gelindiğinde ise bu konuda alınan patent sayısı çok sayıda değişik tasarımla 340’a ulaşmıştır. Günümüzde ise dalga, ... -
A decision making support tool for selecting green building certification credits based on project delivery attributes
(Pergamon-Elsevier Science Ltd, 2017-12)The Green Building (GB) certification process embodies detailed requirements and specifications that lead to additional tasks for project teams, which increases complexity levels of the entire project delivery process. ... -
Determining pull - out deformations of bonded metal anchors embedded in concrete by means of photogrammetry
(International Society for Photogrammetry and Remote Sensing, 2012)Chemical anchorages are applied in many engineering implementations, particularly strengthening of reinforced concrete structures. During strengthening procedure; chemical anchorages should be tested, since they supply to ... -
Determining pull-out deformations by means of an online photogrammetry monitoring system
(Cem Gazioğlu, 2015-03-02)Chemical anchorages are applied in many engineering implementations, particularly strengthening of reinforced concrete structures. During strengthening procedure; chemical anchorages should be tested, since they supply to ... -
Early detection of rogue waves by the wavelet transforms
(Elsevier, 2016-01-08)We discuss the possible advantages of using the wavelet transform over the Fourier transform for the early detection of rogue waves. We show that the triangular wavelet spectra of the rogue waves can be detected at early ... -
An emprical point error model for TLS derived point clouds
(International Society for Photogrammetry and Remote Sensing, 2016)The random error pattern of point clouds has significant effect on the quality of final 3D model. The magnitude and distribution of random errors should be modelled numerically. This work aims at developing such an anisotropic ... -
Energy dissipation characteristics of slab type buildings with special connectors
(National Technical University of Athen, 2015-05-25)The latest developments in the construction technologies and the materials facilitated the practicing engineers to go higher and energy-efficient buildings. However, the safety of the buildings and the residents has been ...