Basit öğe kaydını göster

dc.contributor.authorKoca, Gülruen_US
dc.contributor.authorDündar, Türkeren_US
dc.contributor.authorAs, Nusreten_US
dc.date.accessioned2019-03-18T01:13:06Z
dc.date.available2019-03-18T01:13:06Z
dc.date.issued2018
dc.identifier.citationKoca, G., Dündar, T. & As, N. (2018). Using the ultrasonic stress wave technique to evaluate structural timber members of an old masonry building. Kastamonu Üniversitesi Orman Fakültesi Dergisi, 18(3), 341-349. doi:10.17475/kastorman.499081en_US
dc.identifier.issn1303-2399
dc.identifier.urihttps://hdl.handle.net/11729/1475
dc.identifier.urihttp://dx.doi.org/10.17475/kastorman.499081
dc.identifier.urihttps://app.trdizin.gov.tr/makale/TXpBMk9UazNOdz09
dc.description.abstractAim of study: The main objective of this study is to evaluate the current state of the structural timber members of an old masonry building by using destructive and non-destructive test methods and to determine the efficiency of non-destructive test methods by obtaining correlations between destructive and non-destructive test parameters. Area of study: Specimens were extracted from different parts of an old semi-detached masonry building in Istanbul, Turkey. The building was built at the beginning of the 20th century in Kadikoy, a residential district in the Asia side of Istanbul. Material and Methods: Ultrasonic stress wave test was carried out on specimens prepared from the structural members. Following the ultrasonic based non-destructive tests, the bending strength and modulus of elasticity in the bending tests were determined for the specimens. Main results: According to the results of the experiments, it was observed that the regression correlations were high for the softwoods (fir and spruce), but relatively lower correlations were obtained for the chestnut specimens. Highlights: Because of the good R-2 values obtained between the MOED and mechanical properties of the softwoods, the non-destructive stress wave technique can be recommended for the evaluation of softwoods in structures. Although chestnut showed very good mechanical properties, a satisfactory evaluation of the chestnut members could not be obtained because of the small number of specimens. Further investigation is needed with large sample groups.en_US
dc.description.abstractÇalışmanın amacı: Çalışmanın amacı, eski bir yığma yapının ahşap yapı elemanlarının mevcut durumlarının tahribatlı ve tahribatsız test yöntemleri ile değerlendirilmesidir. Tahribatlı ve tahribatsız test parametleri arasındaki korelasyonlar elde edilerek tahribatsız test yöntemlerinin verimliliğinin belirlenmesi amaçlanmıştır. Çalışma alanı: Numuneler İstanbul'da bitişik nizamda inşa edimiş eski bir yığma yapının farklı kısımlarından çıkarılmıştır. Yapı 20. yüzyılın ilk yarısında, İstanbul'un ağırlıklı olarak konut yerleşiminin bulunduğu Anadolu yakasındaki Kadıköy ilçesinde inşa edilmiştir. Materyal ve Yöntem: Yapısal elemanlardan elde edilmiş numunelere ultrasonik stres dalga testi uygulanmıştır. Bu testin ardından numunelerin, eğilme dayanımı ve eğilmede elastiklik modülü değerleri belirlenmiştir. Sonuçlar: Yapılan deneylerin sonuçlarına göre, yapraklı ağaçlardan elde edilen numunelerin (köknar, ladin) korelasyonları yüksektir, ancak kestane numuneleri için daha düşük korelasyonlar elde edilmiştir. Önemli Vurgular: Yapraklı ağaçlardan elde edilen numunelerin MOED ve mekanik özellikleri arasındaki korelasyon değerlerinin yüksek olması sebebiyle ultrasonik stres dalga testinin bu türlerin değerlendirilmesinde kullanılması tavsiye edilebilir. Bununla birlikte, kestane ahşabı yüksek mekanik özelliklere sahip olmasına rağmen, numune sayısının az olması sebebiyle bu ağaç türü ile ilgili tatmin edici sonuçlar elde edilememiştir. Bu konuda tatmin edici sonuçlar elde edilebilmesi için daha fazla sayıda numune ile araştırma yapılması tavsiye edilmektedir.en_US
dc.language.isoengen_US
dc.publisherKastamonu Univ, Orman Faken_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectBehavioren_US
dc.subjectChestnut wooden_US
dc.subjectDestructive testen_US
dc.subjectFir wooden_US
dc.subjectNon-destructive methoden_US
dc.subjectServiceen_US
dc.subjectSpruce wooden_US
dc.subjectStructural timberen_US
dc.subjectKestane ahşabıen_US
dc.subjectKöknar ahşabıen_US
dc.subjectLadin ahşabıen_US
dc.subjectTahribatlı testen_US
dc.subjectTahribatsız yöntemen_US
dc.subjectYapısal ahşapen_US
dc.titleUsing the ultrasonic stress wave technique to evaluate structural timber members of an old masonry buildingen_US
dc.title.alternativeTarihi bir yığma yapının yapısal ahşap elemanlarının ultrasonik stres dalga yöntemi ile değerlendirilmesien_US
dc.typearticleen_US
dc.description.versionPublisher's Versionen_US
dc.relation.journalKastamonu University Journal Of Forestry Facultyen_US
dc.contributor.departmentIşık Üniversitesi, Güzel Sanatlar Fakültesi, İç Mimarlık Bölümüen_US
dc.contributor.departmentIşık University, Faculty of Fine Arts, Department of Interior Architectureen_US
dc.contributor.authorID0000-0002-6429-009X
dc.identifier.volume18
dc.identifier.issue3
dc.identifier.startpage341
dc.identifier.endpage349
dc.peerreviewedYesen_US
dc.publicationstatusPublisheden_US
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.contributor.institutionauthorKoca, Gülruen_US
dc.relation.indexWOSen_US
dc.relation.indexTR-Dizinen_US
dc.relation.indexEmerging Sources Citation Index (ESCI)en_US
dc.description.wosidWOS:000454320600011


Bu öğenin dosyaları:

Thumbnail

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster