dc.contributor.author | Rahimzadeh Berenji, Kaveh | en_US |
dc.contributor.author | Karagüzel, Umut | en_US |
dc.contributor.author | Özlü, Emre | en_US |
dc.contributor.author | Budak, Erhan | en_US |
dc.date.accessioned | 2019-05-08T04:45:36Z | |
dc.date.available | 2019-05-08T04:45:36Z | |
dc.date.issued | 2019-04-24 | |
dc.identifier.citation | Rahimzadeh Berenji, K., Karagüzel, U., Özlü, E. & Budak, E. (2019). Effects of turn-milling conditions on chip formation and surface finish. CIRP Annals, 68(1), 113-116. doi:10.1016/j.cirp.2019.04.067 | en_US |
dc.identifier.issn | 0007-8506 | |
dc.identifier.issn | 1726-0604 | |
dc.identifier.uri | https://hdl.handle.net/11729/1591 | |
dc.identifier.uri | http://dx.doi.org/10.1016/j.cirp.2019.04.067 | |
dc.description.abstract | Turn-milling operations performed on mill-turn machines offer significant advantages provided that appropriate conditions are used. Compared to conventional machining processes, kinematics and geometry of turn-milling are more complicated due to additional parameters such as speed and diameter ratios of the tool and workpiece as well as eccentricity between them. In this study, the effects of process conditions on chip formation and surface generation are investigated. A novel approach is presented in order to select turn-milling conditions and related machine tool parameters using the relationship between the process and the machine tool. | en_US |
dc.description.sponsorship | The supports from DMG Mori Corporation, Japan and TUBITAK (9159164), Turkey, are appreciated by the authors | en_US |
dc.language.iso | eng | en_US |
dc.publisher | Elsevier Science BV | en_US |
dc.relation.isversionof | 10.1016/j.cirp.2019.04.067 | |
dc.rights | info:eu-repo/semantics/closedAccess | en_US |
dc.subject | Modeling | en_US |
dc.subject | Surface | en_US |
dc.subject | Turn-milling | en_US |
dc.subject | Machine tools | en_US |
dc.subject | Milling cutters | en_US |
dc.subject | Models | en_US |
dc.subject | Surfaces | en_US |
dc.subject | Conventional machining | en_US |
dc.subject | Mill-turn machines | en_US |
dc.subject | Process condition | en_US |
dc.subject | Related machines | en_US |
dc.subject | Surface finishes | en_US |
dc.subject | Surface generations | en_US |
dc.subject | Tool parameter | en_US |
dc.subject | Turn milling | en_US |
dc.subject | Milling (machining) | en_US |
dc.title | Effects of turn-milling conditions on chip formation and surface finish | en_US |
dc.type | article | en_US |
dc.description.version | Publisher's Version | en_US |
dc.relation.journal | CIRP Annals | en_US |
dc.contributor.department | Işık Üniversitesi, Mühendislik Fakültesi, Makine Mühendisliği Bölümü | en_US |
dc.contributor.department | Işık University, Faculty of Engineering, Department of Mechanical Engineering | en_US |
dc.contributor.authorID | 0000-0001-5178-7614 | |
dc.identifier.volume | 68 | |
dc.identifier.issue | 1 | |
dc.identifier.startpage | 113 | |
dc.identifier.endpage | 116 | |
dc.peerreviewed | Yes | en_US |
dc.publicationstatus | Published | en_US |
dc.relation.publicationcategory | Makale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı | en_US |
dc.contributor.institutionauthor | Karagüzel, Umut | en_US |
dc.relation.index | WOS | en_US |
dc.relation.index | Scopus | en_US |
dc.relation.index | Science Citation Index Expanded (SCI-EXPANDED) | en_US |
dc.description.quality | Q2 | |
dc.description.wosid | WOS:000474213500029 | |