Broadband matching of PA-To-PCB interconnection for X-band wireless power transfer
Citation
Köprü, R. (2019). Broadband matching of PA-to-PCB interconnection for X-band wireless power transfer. Paper presented at the 2019 International Conference on Power Generation Systems and Renewable Energy Technologies (PGSRET), 116-121. doi:10.1109/PGSRET.2019.8882695Abstract
Design and simulation of a microwave wideband microstrip unit element bandpass matching network is presented, potential use might be a broadband WPT (microwave wireless power transfer) application in X-band frequencies (8-12 GHz). The source of the main energy can be wind, fossil, tidal, solar, nuclear, hydro etc. and the main energy can be converted from DC to microwave energy which then can be transmitted via the proposed WPT circuit towards a few or a network of a multiple microwave harvester receivers located at a near or far field from the main source. In the work, a bandpass matching network (BPMN) composed of microstrip "unit elements (UEs)" is designed to operate along the whole X-band (8-12 GHz). Designed BPMN is excited by an X-band commercial PA (power amplifier) MMIC (monolithic microwave integrated circuit) packaged chip, and it is loaded by an X-band microstrip patch antenna. A bond wire soldered between the RF output pad of MMIC chip and the input pad of the BPMN has an equivalent LC parasitic impedance assumed to be the generator complex impedance that must be compensated in a typical matching problem. SRFT (simplified real frequency technique) is used in the design of the matching network that compensates the effect of bond wire and very good agreement found between the theoretical design and simulations done in MWO (AWR).
Source
2019 International Conference on Power Generation Systems and Renewable Energy Technologies (PGSRET)The following license files are associated with this item:
Related items
Showing items related by title, author, creator and subject.
-
0.8-1.9 GHz mikrodalga kuvvetlendirici tasarımı
Koç, Onur; Kılınç, Sedat; Köprü, Ramazan; Yarman, Bekir Sıddık Binboğa (IEEE, 2016-12-03)Günümüzde haberleşmede kullanılan iletişim araçlarının tasarımı büyük bir gelişim ve değişim göstermektedir. İletişim araçları birçok sistemden oluşmaktadır. Bu çalışmada iletişimin sağlanmasında büyük öneme sahip olan ... -
Design and simulation of miniaturized communication systems employing symmetrical lossless two-ports constructed with two kinds of elements
Yarman, Bekir Sıddık Binboğa; Aksen, Ahmet; Çimen, Ebru Gürsu (IEEE, 2003)In this paper, a semi-analytic method is presented to describe symmetrical lossless networks with two-kinds of elements, namely, distributed and lumped elements in cascade connection. in terms of the independently chosen ... -
A computer aided design technique for hybrid and monolithic microwave amplifiers employing distributed equalizers with lumped discontinuities
Aksen, Ahmet; Yarman, Bekir Sıddık Binboğa (IEEE, 2001)This paper will addres the use of mixed lumped and distributed elements in the matching equalizers of microwave amplifers for hybrid and monolithic MIC realizations. In this work we show how the computer aided real frequency ...