Identification of sensor location and link flow reconstruction using turn ratio and flow sensors in an arterial network
Künye
Taşcıkaraoğlu, F. Y. & Aksoy, G. (2022). Identification of sensor location and link flow reconstruction using turn ratio and flow sensors in an arterial network. Journal of Intelligent Transportation Systems: Technology, Planning, and Operations, 1-12.doi:10.1080/15472450.2022.2119385Özet
In this article, a quadratic programming problem is considered to identify all link flows in an arterial network when there are unmeasured link flows. A graphical method is provided to determine the minimum number of measurements and sensor locations required to obtain a fully observable model. It is shown that this method is also valid for the augmented graph with turn ratio measurements. If the minimum measurements required are met, a fully determined network can be obtained. If there is not enough measurement, a bound on the magnitude of the resulting inaccuracy in terms of vehicle kilometers traveled (VKT) can be calculated by the proposed linear programming method. The model is that of a queueing network; the parameters describe network geometry, saturation flow rates, turning ratios, timing plan and link flows. Three case studies are conducted to validate this approach. The first two cases are to calculate all missing flows by using a few numbers of measurements and minimum number of measurements required, respectively. Upper and lower bounds in terms of VKT are also calculated for these cases. Third case is to obtain a fully determined network with the minimum number of flow measurements when turn ratio sensors are included. Real measurements are collected from a network in Mugla including 55 links and 16 intersections. Vissim simulator is used to analyze the accuracy of the link flow calculations obtained from the proposed method. The results show that the proposed programming method can calculate the missing flows with a high accuracy and short computation time.
Kaynak
Journal of Intelligent Transportation Systems: Technology, Planning, and OperationsKoleksiyonlar
İlgili Öğeler
Başlık, yazar, küratör ve konuya göre gösterilen ilgili öğeler.
-
Cluster based sensor scheduling in a target tracking application with particle filtering
Özfidan, Özgür; Bayazıt, Uluğ; Çırpan, Hakan Ali (IEEE, 2007)In multi-sensor applications management of sensors is necessary for the classification of data they produce and for the efficient use of sensors as well. One of the important aspects in sensor management is the sensor ... -
Range sensing with a Scheimpflug camera and a CMOS sensor/processor chip
Çilingiroğlu, Uğur; Chen, Sicheng; Çilingiroğlu, Emre (IEEE-INST Electrical Electronics Engineers Inc, 2004-02)An image-based range-sensing technique is presented. The technique is originally considered for highway collision avoidance applications, but its generality makes it suitable for application in robotics, manufacturing, and ... -
Parçacık süzgeçleme ile hedef izleme uygulamasında topak çizelgeleme
Özfidan, Özgür; Bayazıt, Uluğ; Çırpan, Hakan Ali (IEEE, 2007)Bu çalışmada, uzaklık ölçer algılayıcılarla hedef takibi uygulamasında algılayıcı çizelgeleme problemi ele alınmıştır. Çok algılayıcılı uygulamalarda algılayıcıların yönetimi ürettikleri verilerin sınıflandırılması için ...