Development of turn-milling machine tool program parameters based on basic cutting geometry

Basit Öğe Kaydı
dc.authorid0000-0002-4162-4843
dc.authorid0000-0001-5178-7614
dc.authorid0000-0001-8249-067X
dc.authorid0000-0002-7002-0563
dc.contributor.authorBerenji, Kaveh Rahimzadehen_US
dc.contributor.authorKaragüzel, Umuten_US
dc.contributor.authorÖzlü, Emreen_US
dc.contributor.authorBudak, Erhanen_US
dc.date.accessioned2026-02-09T10:42:42Z
dc.date.available2026-02-09T10:42:42Z
dc.date.issued2017-11-02
dc.departmentIşık Üniversitesi, Mühendislik Fakültesi, Makine Mühendisliği Bölümüen_US
dc.departmentIşık University, Faculty of Engineering, Department of Mechanical Engineeringen_US
dc.description.abstractThe turn-milling operation is a multitasking machining process that takes advantages of turning and milling operations simultaneously. However, using these two machining operations at the same time results in more complex and different cutting parameters compared to conventional turning process. In this study, the turnmilling kinematics have been modeled analytically. Using the model proposed in this study, the required parameters for a machine tool such as feed rate, workpiece, and tool rotational speed can be derived in terms of basic cutting parameters which are cutting speed, feed per tooth, radial depth of cut, and axial depth of cut.en_US
dc.description.versionPublisher's Versionen_US
dc.identifier.citationBerenji, K. R., Karagüzel, U., Özlü, E. & Budak, E. (2017). Development of turn-milling machine tool program parameters based on basic cutting geometry. Paper presented at the 8th International Symposium on Machining, 148-156.en_US
dc.identifier.endpage156
dc.identifier.startpage148
dc.identifier.urihttps://hdl.handle.net/11729/6991
dc.identifier.urihttps://www.utis.tc/history
dc.institutionauthorKaragüzel, Umuten_US
dc.institutionauthorid0000-0001-5178-7614
dc.language.isoenen_US
dc.peerreviewedYesen_US
dc.publicationstatusPublisheden_US
dc.relation.ispartof8th International Symposium on Machiningen_US
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectTurn-millingen_US
dc.subjectCutting parametersen_US
dc.subjectCNCen_US
dc.titleDevelopment of turn-milling machine tool program parameters based on basic cutting geometryen_US
dc.typeConference Objecten_US
dspace.entity.typePublicationen_US

Dosyalar

Lisans paketi
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
license.txt
Boyut:
1.17 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama:
İndir

Koleksiyon

Bildiri Koleksiyonu | Makine Mühendisliği Bölümü