Effects of different production parameters on mechanical properties in FDM-printed products

Basit Öğe Kaydı
dc.authorid0000-0002-0719-4405
dc.authorid0000-0001-5519-7240
dc.authorid0000-0002-6150-9762
dc.contributor.authorKösemen, Elifnuren_US
dc.contributor.authorKuzu, Ali Taneren_US
dc.contributor.authorBakkal, Mustafaen_US
dc.date.accessioned2026-02-10T06:33:48Z
dc.date.available2026-02-10T06:33:48Z
dc.date.issued2022-10-08
dc.departmentIşık Üniversitesi, Mühendislik ve Doğa Bilimleri Fakültesi, Makine Mühendisliği Bölümüen_US
dc.departmentIşık University, Faculty of Engineering and Natural Sciences, Department of Mechanical Engineeringen_US
dc.description.abstractFDM, which is a common additive manufacturing technology in producing plastic parts, allows for the comparison of many different production parameters. This article presents the variation of density, hardness, tensile and impact strength depending on the production parameters of the number of contours, infill pattern and orientation angle. 8 different production parameter combinations were created using 2 diff erent contour numbers as 1 and 2, 2 different infill patterns as sparse high density and hexagram, and two different orientation angles as 0o/45o degrees, and sample production was made with FDM technology and ABS material. In the experiments performed on the samples produced with the specified production combinations, no major change in density and hardness was detected, and it was determined that the production parameter combination that gave the best results in both tensile and impact strength was hexagram infill pattern, 45o orientation angle and 2 contour production parameters.en_US
dc.description.versionPublisher's Versionen_US
dc.identifier.citationKösemen, E., Kuzu, A. T. & Bakkal, M. (2022). Effects of different production parameters on mechanical properties in FDM-printed products. Paper presented at the Additive Manufacturing Conference, 45-45.en_US
dc.identifier.endpage45
dc.identifier.isbn9786259507132
dc.identifier.startpage45
dc.identifier.urihttps://hdl.handle.net/11729/6994
dc.identifier.urihttps://amctr.org/
dc.institutionauthorKuzu, Ali Taneren_US
dc.institutionauthorid0000-0001-5519-7240
dc.language.isoenen_US
dc.peerreviewedYesen_US
dc.publicationstatusPublished
dc.publisherEklemeli İmalat Derneği Yayınlarıen_US
dc.relation.ispartofAdditive Manufacturing Conferenceen_US
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectFDMen_US
dc.subjectTensile strengthen_US
dc.subjectImpact strengthen_US
dc.subjectABSen_US
dc.titleEffects of different production parameters on mechanical properties in FDM-printed productsen_US
dc.typeConference Objecten_US
dspace.entity.typePublicationen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
Effects_of_different_production_parameters_on_mechanical_properties_in_FDM_printed_products.pdf
Boyut:
177.25 KB
Biçim:
Adobe Portable Document Format
İndir
Lisans paketi
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
license.txt
Boyut:
1.17 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama:
İndir

Koleksiyon

Bildiri Koleksiyonu | Makine Mühendisliği Bölümü