The development of a hybrid cutting model for workpiece temperature distribution via advection heat partition approach

Basit Öğe Kaydı
dc.authorid0000-0002-8574-2147
dc.authorid0000-0001-5519-7240
dc.authorid0000-0002-6150-9762
dc.contributor.authorKara, Mehmet Emreen_US
dc.contributor.authorKuzu, Ali Taneren_US
dc.contributor.authorBakkal, Mustafaen_US
dc.date.accessioned2023-04-24T08:19:38Z
dc.date.available2023-04-24T08:19:38Z
dc.date.issued2023-04-15
dc.departmentIşık Üniversitesi, Mühendislik ve Doğa Bilimleri Fakültesi, Makine Mühendisliği Bölümüen_US
dc.departmentIşık University, Faculty of Engineering and Natural Sciences, Department of Mechanical Engineeringen_US
dc.descriptionWe are thankful for the support received from The Scientific and Technological Research Council of Türkiye.en_US
dc.description.abstractThis paper presents a novel hybrid cutting model for the prediction of workpiece temperature distribution during the dry milling process of compacted graphite iron (CGI). The hybrid model consists of an analytical force model based on a mechanistic approach and finite element analysis (FEA) based on the thermal model. The heat generated during the milling process transferred to the workpiece is computed via the advection heat partition model. The workpiece temperature distribution obtained through the heat loads, using as boundary conditions in the FEA, was calculated by means of cutting forces. The developed force and thermal models have been experimentally validated, and good agreement between the measured and calculated results has been observed. The energy and active work calculations show that by doubling the feed during CGI milling, an energy saving of about 10% is achieved despite almost doubling the cutting forces.en_US
dc.description.sponsorshipTürkiye Bilimsel ve Teknolojik Araştırma Kurumuen_US
dc.description.versionPublisher's Versionen_US
dc.identifier.citationKara, M. E., Kuzu, A. T. & Bakkal, M. (2023). The development of a hybrid cutting model for workpiece temperature distribution via advection heat partition approach. International Journal of Advanced Manufacturing Technology, 126(9-10), 4283-4295. doi:10.1007/s00170-023-11393-2en_US
dc.identifier.doi10.1007/s00170-023-11393-2
dc.identifier.endpage4295
dc.identifier.issn0268-3768
dc.identifier.issn1433-3015
dc.identifier.issue9-10
dc.identifier.scopus2-s2.0-85152519116
dc.identifier.scopusqualityQ1
dc.identifier.startpage4283
dc.identifier.urihttps://hdl.handle.net/11729/5528
dc.identifier.urihttp://dx.doi.org/10.1007/s00170-023-11393-2
dc.identifier.volume126
dc.identifier.wosWOS:000969745500002
dc.identifier.wosqualityQ2
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.indekslendigikaynakScience Citation Index Expanded (SCI-EXPANDED)en_US
dc.institutionauthorKuzu, Ali Taneren_US
dc.institutionauthorid0000-0001-5519-7240
dc.language.isoenen_US
dc.peerreviewedYesen_US
dc.publicationstatusPublisheden_US
dc.publisherSpringer Science and Business Media Deutschland GmbHen_US
dc.relation.ispartofInternational Journal of Advanced Manufacturing Technologyen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectCGIen_US
dc.subjectFEAen_US
dc.subjectForce modelingen_US
dc.subjectMilling processen_US
dc.subjectThermal modelingen_US
dc.subjectAdvectionen_US
dc.subjectCuttingen_US
dc.subjectEnergy conservationen_US
dc.subjectFinite element methoden_US
dc.subjectMilling (machining)en_US
dc.subjectThermography (temperature measurement)en_US
dc.subjectCompacted graphite ironen_US
dc.subjectCutting forcesen_US
dc.subjectCutting modelen_US
dc.subjectDoublingsen_US
dc.subjectFinite element analyseen_US
dc.subjectHeat partitionsen_US
dc.subjectThermal modelen_US
dc.subjectWorkpiece temperatureen_US
dc.subjectTemperature distributionen_US
dc.subjectResidual-stressen_US
dc.subjectFaceen_US
dc.subjectPredictionen_US
dc.subjectSpeeden_US
dc.subjectToolen_US
dc.titleThe development of a hybrid cutting model for workpiece temperature distribution via advection heat partition approachen_US
dc.typeArticleen_US
dspace.entity.typePublication

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
The_development_of_a_hybrid_cutting_model_for_workpiece_temperature_distribution_via_advection_heat_partition_approach.pdf
Boyut:
4.33 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Publisher's Version
İndir
Lisans paketi
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
license.txt
Boyut:
1.44 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama:
İndir

Koleksiyon

Makale Koleksiyonu | Makine Mühendisliği Bölümü
Scopus İndeksli Yayınlar Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu