7 sonuçlar
Arama Sonuçları
Listeleniyor 1 - 7 / 7
Yayın Immitance data modelling via linear interpolation techniques: a classical circuit theory approach(Wiley-Blackwell, 2004-11) Yarman, Bekir Sıddık Binboğa; Kılınç, Ali; Aksen, AhmetWith the advancement of the manufacturing technologies to produce new generation analog/digital communication systems, immitance data modelling has gained renewed importance in the literature. Specifically, models are utilized for behaviour characterization, simulation of physical devices or to design sub-systems with active and passive solid-state devices. Therefore, in this paper, new computer aided tools are presented to model one port immitance data by means of linear interpolation techniques. The basic philosophy of the new modelling tools is based on the numerical decomposition of the immitance data into its minimum and Foster parts. Computer algorithms are presented to model the minimum and the Foster parts of the given immitance data. Implementations of these algorithms are exhibited by means of examples. Depending on the application, modelling tools based on linear interpolation techniques may present 'computational and practical' advantages over the existing interpolation techniques, non-linear curve fittings or regression methods. It is expected that the new modelling tools will be utilized to provide initial circuit topologies to the commercially available analysis/simulation and design packages.Yayın Circuit model for given reflectance data constructed with mixed lumped and distributed elements for high speed/high frequency communication systems(IEEE, 2005) Yarman, Bekir Sıddık Binboğa; Şengül, Metin; Kılınç, Ali; Aksen, AhmetIn this paper, a reflectance-based "non linear interpolation method" is presented to model the measured or computed data, obtained from a "passive one-port physical device" using mixed lumped and distributed elements. Mixed element model is constructed with cascade connection of series inductors [L], commensurate transmission lines or so called Unit Elements [UE] and shunt capacitors[C]. Basis of the new model rests on the numerical generation of the scattering parameters of the lossless two-port constructed with cascade connection of simple [L]-[UE]-[C] elements which describes a lossless 2-port in Darlington sense. The new modeling technique does not require direct optimization of the circuit elements of the selected topology. Rather, two-variable reflection coefficient is directly determined by means of a non linear but "convergence guaranteed" interpolation process to best fit the given data. A low-pass filter input reflection coefficient modeling example is included to exhibit the utilization of the proposed modeling method.Yayın A parametric approach to construct two-variable positive real impedance functions for the real frequency design of mixed lumped-distributed matching networks(IEEE, 2004) Aksen, Ahmet; Pınarbaşı, Hacı; Yarman, Bekir Sıddık BinboğaIn this paper, a parametric approach to construct two-variable positive real driving point impedance functions characterizing lossless ladder networks with mixed lumped and distributed elements is presented. The proposed approach is based on the generation of two-variable positive real impedance functions from the single variable boundary conditions. Utilizing the proposed parametric construction algorithm, real frequency matching technique is extended to the design of matching networks with mixed lumped and distributed elements. The application of the approach is illustrated by a broadband microwave amplifier design incorporating mixed lumped and distributed type matching networks. The resultant design has been compared with the AWR Microwave Office software simulation.Yayın A reflectance-based computer aided modelling tool for high speed/high frequency communication systems(IEEE, 2001) Yarman, Bekir Sıddık Binboğa; Aksen, AhmetA reflectance-based method is presented to model the measured or computed data, obtained from a "passive one-port physical device" by means of its Darlington equivalent. The basis of the new modelling tool rests on the numerical generation of the scattering parameters of the Darlington 2-port from the given reflectance employing the losslessness condition. The proposed technique does not require any choice for the circuit topology to build the model. The circuit topology is the natural consequence of the modelling process.Yayın An immitance based tool for modelling passive one-port devices by means of darlington equivalents(Urban & Fischer Verlag, 2001) Yarman, Bekir Sıddık Binboğa; Aksen, Ahmet; Kılınç, AliAn immitance-based method is presented to model measured or computed data, obtained from a "passive one-port physical device" by means of its Darlington equivalent. In other words, the given data is modelled as a lossless two port terminated in a unit resistor. The basis of the new modelling tool rests on the numerical decomposition of the given immitance data into its Foster and minimum parts. Therefore, the proposed technique does not require any choice for the circuit topology to build the model. Rather, the optimum circuit topology that characterises the given data is the natural consequence of the modelling process proposed in this paper. A main algorithm is presented to construct the model from the given data. It is expected that the proposed modelling tool will find practical applications in the behaviour characterisation, simulation, and design of high speed/high frequency analog/digital mobile communication sub-systems manufactured on VLSI chips. An antenna-modelling example is included to systematically exhibit the implementation of the modelling technique.Yayın A parametric approach to describe distributed two-ports with lumped discontinuities for the design of broadband MMIC's(IEEE, 2003) Aksen, Ahmet; Yarman, Bekir Sıddık BinboğaThis paper addreses the use of mixed lumped and distributed elements in the matching equalizers of broadband microwave communication subsytems in MMIC realizations. Construction of two-variable scattering functions for lossless equalizers with mixed lumped-distributed elements is discussed. For the computer aided design and the simulation of lossless distributed two-ports with lumped discontinuity models, a parametric real frequency matching technique is presented. It is expected that the proposed tool will find practical applications for accurate representation of MMIC layouts. A matching network design example is included to systematically exhibit the implementation of the proposed approach.Yayın Reflectance data model with mixed lumped and distributed elements for wireless communication systems(IEEE, 2005) Yarman, Bekir Sıddık Binboğa; Şengül, Metin; Kılınç, Ali; Aksen, AhmetIn this paper, a new method is presented to model the given reflectance data obtained from a "passive one-port physical device", as a lossless two port consists of lumped and distributed elements. Basis of the new method rests on the interpolation of the given data as a realizable bounded-real (BR) reflection function in two variables. The desired circuit model is then obtained as the result of the synthesis of this function in two kinds of elements; namely, distributed and lumped circuit elements. An algorithm is presented to generate the circuit model step by step and an example is also included to exhibit the utilization of the new modeling algorithm.
