7 sonuçlar
Arama Sonuçları
Listeleniyor 1 - 7 / 7
Yayın Thermal quenching of thermoluminescence in quartz samples of various origins(Univ Agean, Dept Mediterranean Stud, 2010) Subedi, Bhagawan; Afouxenidis, Dimitrios; Polymeris, George S.; Bakoglidis, Konstantinos D.; Raptis, Spyridoula; Tsirliganis, Nestor C.; Kitis, GeorgeThe effect of thermal quenching plays an important role in the thermoluminescence (TL) of quartz on which many applications of TL are based. In present work it is investigated that the thermal quenching parameters i.e. the activation energy W and the dimensionless parameter C, are more or less the same for every kind of quartzes or sample dependent on strong external treatment like a high temperature annealing. This preliminary investigation of seven quartz samples of different origin showed that the thermal quenching parameters W and C are common (universal) for most of the quartz samples.Yayın Preliminary TL and OSL investigations of obsidian samples(Univ Agean, Dept Mediterranean Stud, 2010) Polymeris, George S.; Gogou, D.; Afouxenidis, Dimitrios; Rapti, Sofia; Tsirliganis, Nestor C.; Kitis, GeorgeObsidian is a volcaniclastic mineral extremely hard to break, which was used in prehistoric Greece (and elsewhere in the World), in order to provide tools, weapons, knives and arrowheads. The present work aims to characterize this extremely precious tool stone by using both thermoluminescence (TL) and optically stimulated luminescence (OSL) techniques and investigate its potential use for luminescence dating purposes. Basic TL and OSL properties, such as TL and OSL thermal and optical stability, repeatability, TL and LM-OSL glow curve shape and mainly the linearity of the TL and OSL signals as a function of beta dose were investigated. Artificially irradiated samples indicate all promising luminescence features, such as the 110 degrees C TL peak and dose response sub-linearity for intermediate doses, quick and effective bleaching all over the entire TL glow curve, along with quite linear CW-OSL dose response for doses larger than 5 Gy. The lack of predose sensitisation indicates the suitability of the material for single aliquot measurements. Furthermore, several features provide indications that the signal does not relate to quartz, but in fact to other silicates. Unfortunately, both lack of bleaching ability for NIL signal, along with a peculiar shape of NOSL, provide major difficulties in dating applications.Yayın Dating fossil root cast (Black Sea coast, Turkey) using thermoluminescence: Implications for windblown drift of shelf carbonates during MIS 2(Elsevier Ltd., 2016-05-16) Polymeris, George S.; Kitis, George; Güneç Kıyak, Nafiye; Theodosoglou, Eleni; Tsirliganis, Nestor C.; Ertek, Topçu Ahmet; Erginal, Ahmet EvrenRhizoliths are mostly sub-aerially exposed root prints which appear through removal of the rock units that cap them. A horizontal-lying residual of a rhizolith, consisting purely of soft inner core material of white color was recovered 10 km west of Şile, Istanbul, in northwest Turkey within laminated oolithic massive aeolianite. The inner part, consisting purely of calcium carbonate, was dated by applying thermoluminescence, while for the outer shelves optically stimulated luminescence of quartz was used for age assessment. The age of the CaCO3 infill occupying the original place of the decayed plant roots was found to be 26.8 (±5.0) ka, corresponding to MIS 2. When compared with the ages of the middle (105.2 ± 15.6 ka) and outer (127 ± 9 ka) layers, corresponding to the later stage of MIS 5e or early stage of MIS 5d, the inner core coincides with the last glacial period when the sea-level was lower than the present, promoting transportation of ooids by offshore winds in conjunction with the exposed shelf carbonates. Based on the results yielded, rhizolith is much younger than the host rock aeolianite and witnesses to last glacial sea level lowstand when removal of shelf carbonates by offshore winds was promoted from the exposed shallow shelf plain. The results provide strong evidence that rhizoliths may not be coeval with the aeolianites within which they are embedded.Yayın TL and OSL response of turquoise for dosimetric application(University of Aegean, 2010) Subedi, Bhagawan; Afouxenidis, Dimitrios; Polymeris, George S.; Tsirliganis, Nestor C.; Paraskevopoulos, Konstantinos M.; Kitis, GeorgeTurquoise is one of the amongst first gem stones used in jewelry and possessing cultural value since 2000 BC (at least). This work attempts characterize this stone scientifically using both thermally (TL) and optically stimulated luminescence (OSL) techniques. The experimental investigation included 1) the study of the natural TL and OSL signals, 2) the reproducibility of TL sensitivity over repeated irradiation and TL readout cycles, 3) dependence of sensitivity on annealing temperatures and 4) the TL and OSL dose response curves. The potential use of the TL and OSL techniques in determination of provenance, accidental dosimetry and probably to authenticity and dating purposes are then discussed.Yayın The correlation of fast OSL component with the TL peak at 325 degrees C in quartz of various origins(Elsevier Science BV, 2010-02) Kitis, George; Güneç Kıyak, Nafiye; Polymeris, George S.; Tsirliganis, Nestor C.The fast component of the optically stimulated luminescence (OSL) signal in quartz is the basic tool for the optical dating. Its relation with the thermoluminescence (TL) glow-peak at about 325 degrees C is well established for naturally irradiated quartz. This relationship is also an important part of a general model for quartz on which many theoretical simulations of various OSL experimental results have been based. In the present work this relationship is systematically investigated in nine quartz samples of different origin. The linearly modulated OSL (LM-OSL) curves of all quartz samples for stimulation time less than 50s consists of two components discriminated easily by a computerized curve deconvolution (CCD) analysis. By comparing the un-bleached to the respective bleached TL glow-curve, it is found that the system of these two fast OSL components is directly related with only a small portion of the electron traps responsible for the TL glow-peaks in the temperature region 200-400 degrees C. By increasing the stimulation times, besides the two fast components, the medium and the slow components are also obtained. The medium and slow components are clearly related with the main body of the electron traps responsible for TL glow-peaks in the same temperature region 200-400 degrees C. Despite their different origin all quartz samples show an appreciable homogeneity concerning the number and time position of the individual components, whereas, the relative TL/OSL intensities vary strongly from sample to sample with the integrated TL intensity being generally much less than the integrated OSL intensity.Yayın Thermoluminescence as a probe in bioactivity studies; the case of 58S sol-gel bioactive glass(IOP Publishing Ltd, 2011-10-05) Polymeris, George S.; Goudouri, Ourania Menti; Kontonasaki, Eleana; Paraskevopoulos, Konstantinos M.; Tsirliganis, Nestor C.; Kitis, GeorgeThe formation of a carbonated hydroxyapatite (HCAp) layer on the surface of bioactive materials is the main reaction that takes place upon their immersion in physiological fluids. To date, all techniques used for the identification of this HCAp formation are rather time consuming and not well suited to detailed and rapid monitoring of changes in the bioactivity response of the material. The aim of this work is to explore the possibility of using thermoluminescence (TL) for the discrimination between different bioactive responses in the case of the 58S bioactive glass. Results provided strong indications that the 110 degrees C TL peak of quartz can be used effectively in the study of the bioactive behaviour of 58S bioactive glass, since it is unambiguously present in all samples and does not require deconvolution analysis. Furthermore, the intensity of the 110 degrees C TL peak is proven to be very sensitive to the different bioactive responses, identifying the loss of silica which takes place at the first stages of the sequence. The discontinuities of the 110 degrees C TL peak intensity plot versus immersion time at 8 and 1440 min provide experimental indications regarding the timescale for both the beginning of amorphous CaP formation as well as the end of crystalline hydroxyl-apatite formation respectively, while the spike in the sensitization of the 110 degrees C TL peak, which was observed for immersion times ranging between 20 and 40 min, could be an experimental feature indicating the beginning of the crystalline HCAp formation.Yayın Potassium determinations using sem, faas and xrf: some experimental notes(University of Aegean, 2011) Liritzis, Ioannis; Mavrikis, D; Zacharias, Nikolaos; Sakalis, Anastasios; Tsirliganis, Nestor C.; Polymeris, George S.The calibration of Scanning Electron Microscopy coupled with Energy Dispersive X-Rays Spectrometry (SEM-EDS) for elemental quantitative analysis is an important task for characterization, provenance and absolute dating purposes. In particular the potassium determination is an important contributor to dose rate assessments in luminescence and Electron Spin Resonance (ESR) dating. Here a SEM-EDX is calibrated on different archaeological and geoarchaeological materials against standard laboratory samples as well as measured by micro X-Rays Fluorescence (mu XRF) and flame atomic absorption spectroscopy (FAAS) techniques. A common linear relationship is obtained for most elements and certain rock types used and two clear linear regressions for two types of rocks; one for granite, diorite, microgranite and sediments and another ceramic sherds, soils, marble schists, breccia. Such linear regressions become readily available for a future fast, efficient and accurate way of potassium determination.
