5 sonuçlar
Arama Sonuçları
Listeleniyor 1 - 5 / 5
Yayın Design of a new low loss fully CMOS tunable floating active inductor(Springer New York LLC, 2016-12) Momen, Hadi Ghasemzadeh; Yazgı, Metin; Köprü, Ramazan; Saatlo, Ali NaderiIn this paper, a new tunable floating active inductor based on a modified tunable grounded active inductor is proposed. The multi regulated cascade stage is used in the proposed active structure to decrease the parasitic series resistance of active inductor, thus the Q factor enhancement is obtained. Furthermore, the arrangement of this stage leads to the smaller input transistor which determines active inductor’s self-resonance frequency and to be free of body effect which is crucial in sub-micron technology. Symmetrical design strategy has enabled both ports of the proposed floating active inductor to demonstrate the same properties. The Q factor and active inductor value are tuned with bias current and flexible capacitance (varactor), respectively. The self-resonance frequency of floating active inductor (~6.2 GHz) is almost the same as grounded prototype. In addition, the proposed active inductor also shows higher quality factor and inductance value compared to the conventional floating active inductor circuits. To show the performance of suggested circuit, simulations are done by using a 0.18 µm CMOS process, which demonstrates an adjustable quality factor of 10–567 with an inductance value range of 6–284 nH. Total DC power consumption and occupied area are 2 mW and 934.4 µm2, respectively.Yayın Designing a new high Q fully CMOS tunable floating active inductor based on modified tunable grounded active inductor(Institute of Electrical and Electronics Engineers Inc, 2015) Momen, Hadi Ghasemzadeh; Yazgı, Metin; Köprü, RamazanA new Tunable Floating Active Inductor (TFAI) based on modified Tunable Grounded Active Inductor (TGAI) is proposed. Multi regulated cascade stage is used in TGAI to boost gain of input impedance and inductor value thus the Q factor enhancement obtained. The arrangement of Multi-Regulated Cascade (MRC) stage is caused the input transistor which determines AI self-resonance frequency to be as small as possible and it is free of body effect which is crucial in sub-micron technology. Compared to traditional CMOS spiral inductors, the active inductor proposed in this paper can substantially improve its equivalent inductance and quality factor. This TFAI was designed using the AMS 0.18 um RF CMOS process, which demonstrates an adjustable quality factor of 10?567 with a 6?284 nH inductance. The Q factor and value of active inductor is adjusted with bias current and flexible capacitance (varactor), respectively. The self-resonance frequency for both grounded and floating AI is about 6.2 GHz. The proposed active inductor also shows wide dynamic range and higher quality factor compared to conventional floating active inductor circuits.Yayın 3-D Vibration analysis of microstretch plates(Springer, 2008) İnan, Esin; Kiriş, AhmetIn the present work, rectangular plates with various boundary conditions are Studied, which are modeled by the rnicrostretch theory. Wave propagation problem is investigated and new waves are observed which do not appear in the classical theory of elasticity. Ritz method is used for this investigation. Triplicate Chebyshev series, multiplied by boundary functions, are used as admissible functions and the frequency equations of the micro-stretch plate are obtained by the use of Chebyshev-Ritz method. The additional frequencies due to the microstructure of the plate are observed among the values of the frequencies obtained from the classical theory of elasticity. We observed that these additional frequencies disappear while the all microstretch constants are taken as zero.Yayın On the identification of microstretch elastic moduli of materials by using vibration data of plates(Pergamon-Elsevier Science LTD, 2008-06) Kırış, Ahmet; İnan, EsinIn the present work, the vibration problems of rectangular plates modeled by Eringen's microstretch theory are investigated for the identification of the upper bounds of the microstretch moduli of the plate material. The calculated frequencies of the plates are obtained by extending the Ritz method to the microstretch plates. The three dimensional (3D) vibration analysis of the plates shows that some additional frequencies occur among the classical frequencies as characterizing the microstretch effects. Then it is also observed that these additional frequencies disappear and only the classical frequencies remain with the increasing values of microstretch constants. The inverse problem is established for the identification of the upper bounds of the microstretch elastic constants as an optimization problem where an error function is minimized.Yayın 3-D Vibration analysis of the rectangular micro damaged plates(Springer, 2008) Kiriş, Ahmet; İnan, EsinIn the present work, damaged plates are modeled by the micro-elongation theory which neglects the micropolar effects in Eringen's microstretch theory. The wave propagation problem is Studied and a new wave which does not appear in the classical theory of elasticity is observed. The Ritz method is extended to the microelongation theory and triplicate Chebyshev series multiplied by a boundary function are used as admissible functions to approximate plate deflection, and the frequency equations of the microelongated plate are obtained by using Chebyshev-Ritz method. The additional frequencies due to the microstructure of the plate are observed among the values of the classical frequencies. We examined the relation between these additional frequencies and the material constants of the microelongated medium and observed that these additional frequencies disappear while the all microelongational constants are taken as zero.
