4 sonuçlar
Arama Sonuçları
Listeleniyor 1 - 4 / 4
Yayın The sectoral sweeper scheme for wireless sensor networks: Adaptive antenna array based sensor node management and location estimation(Kluwer Academic Publishers-Plenum Publishers, 2006-12) Erdoğan, Ayhan; Coşkun, Vedat; Kavak, AdnanWe introduce a novel sensor node management and location estimation method referred as sectoral sweeper (SS) scheme that uses an adaptive antenna array (AAA) at a central node in wireless sensor networks (WSNs). With the SS scheme, the central node can activate or deactivate the nodes in a desired region which is specified by beam direction and beam width of the transmit beam and also by minimum and maximum thresholds (R (min) and R (max)) for the received signal strength indicator (RSSI) of signals received by the nodes. In order to perform a specified task that is associated with a Task_id, two different beams are transmitted, which are task region beam and routing region beam to switch the nodes into active or routing modes. Since our scheme does not require any additional software or hardware for node management and location estimation in sensor nodes, the deficiencies of tiny sensors are effectively eliminated. The proposed scheme is shown to reduce the number of sensing nodes and the amount of data traffic in the network, thus leading to considerable savings in energy consumption and prolonged sensor lifetime.Yayın On the equilibrium of a rigid body suspended by a set of linear springs(John Wiley & Sons, 2000-08) Tokad, YılmazIn this paper an approach is described for determining equilibrium states of a rigid body suspended elastically in space by a set of linear springs. This system is considered as a two-terminal generalized spring with terminal across (translational and rotational velocities, V-G, omega(G)) and terminal through (terminal force and moment, f(G), m(G)) variables. The algorithmic approach used for the solution of six nonlinear and coupled equilibrium equations consists of two major steps. The first step is to assign an initial orientation to the rigid body which is represented by the transformation (rotation) matrix T(theta,n) and reduce the problem to the solution of force equations only through a computer program. This yields the position vector xi of a preselected point G on the rigid body. Although the terminal force f(G) becomes zero at this position, the calculated terminal moment m(G), in general, is not equal to zero. The second step is to try to determine the correct orientation of the rigid body based on an argument that the terminal moment should vanish. The same argument is also used for the solution of force equilibrium equations. These two steps are repeated several times until both f(G) and m(G) vanish simultaneously yielding an equilibrium state (xi,T(theta, n)). Application of the approach is illustrated through various examples. It is observed that, if there are nonstable equilibrium states of the system, then sometimes all possible physical equilibrium states may not be obtained with this approach.Yayın Signals of chaotic behavior in PMMA(Pergamon-Elsevier Science, 2003-07) Hacınlıyan, Avadis Simon; Skarlatos, Yani; Şahin, Gökhan; Akın, Güzin GülsünThe time evolution of the current passing through PMMA polymer thin films under 10 V at 23degreesC (296 K) was sampled at intervals ranging from 1 to 20 s. The data showed chaotic behavior in the context of pinned charge density waves [Phys. Rev. B 41 (1990) 11522]. The resultant time series has been analyzed by means of TISEAN, time series analysis software [The TISEAN package CHAOS 9 (1999) 413]. The analysis has revealed a positive maximal Lyapunov exponent. This is also corroborated by a calculation of the fractal dimension and application of the Kaplan-Yorke conjecture. In the analysis two widely separated time scales have been observed; the first zero crossing of the correlation function at 8380 s and the first marked minimum of the average mutual information at 40 s.Yayın Air interface identification for Software Radio systems(Elsevier GMBH, 2007) Öner, Mustafa Mengüç; Jondral, Friedrich K.Reconfigurable Software Radio (SR) equipment is considered as the next evolutionary step in the mobile communications. One of the most crucial properties of a SR terminal is that it is capable of using a wide range of air interface standards, providing a seamless interoperability between different standards and an enhanced roaming capability, paving way to a more flexible and efficient use of spectral resources. This multimode operation has to be supported by a number of key functionalities, one of which is the air interface identification. A SR terminal, when switched on, has to be able to locate and identify the air interfaces available in the frequency environment, and while connected to a network, it has to monitor the presence of alternative air interfaces to perform interstandard handover if necessary. In our work, we propose exploiting the distinct cyclostationary properties of signals from different air interfaces as features for air interface identification.
