2 sonuçlar
Arama Sonuçları
Listeleniyor 1 - 2 / 2
Yayın The investigation of the effect of saturation flow on the average vehicle delay at signalized intersections(Izmir Democracy University, 2021-12-18) Çakıcı, Ziya; Aksoy, GökerSaturation flow (s) is one of the most important parameters used for determining of signal timings at signalized intersections. Therefore, this parameter directly affects the various intersection performance criteria such as queue length, average delay, the level of service and capacity. In this study, determination of the effect of saturation flow rate on the average vehicle delay is aimed. In the scope of the study, firstly, an optimization model which minimizes the average vehicle delay at the intersection is set. Then, a software which optimizes the signal timings at the intersection by using Differential Evolution Algorithm (DEA) is prepared in MATLAB environment. In the second stage, 15 traffic volume scenarios which have different total traffic volume from each other for a four-leg signalized intersection are created in order to test different traffic cases. Created scenarios are classified in 3 groups as Low Volume (LV), Moderate Volume (MV) and High Volume (HV). In the next stage, each scenario is analyzed considering 9 different saturation flow rates (s=1600, 1650, 1700, 1750, 1800, 1850, 1900, 1950, 2000 vehicle/hour/lane), separately. In case of implementing of these saturation flow rates, obtained signal optimum timings and average vehicle delay for each scenario are evaluated in details. In the last stage of the study, the average vehicle delays obtained by using s=1800 vehicle/hour/lane which is frequently encountered in many studies in the literature are compared with the average vehicle delays obtained by using other saturation flow rates, relatively. As a result of the comparisons, it is determined that the differences between average vehicle delays are quite low (between -0.9% and +1.2%) in case of Low Volume. In case of Moderate Volume, differences between -20.8% and +37.2% are seen. In case of High Volume, it can be said that the differences change between -41.4% and +116.3%. This situation clearly demonstrate that accurate and faultless measurement of saturation flow rate is quite important in terms of the performance of the intersection, especially in case of moderate and high volume.Yayın Examination of delay and travel time at highway toll booths using a micro simulation program: example of Northern Marmara Highway Kurnaköy(2022-04) Özdemir, Ümitcan; Gürsoy, Mustafa; Aksoy, GökerThe aim of this study is to reveal that barrier toll booths are inefficient in terms of delay and travel time when compared to non-barrier toll booths. In our study, Kurnaköy toll booth, on the Northern Marmara Highway, was examined. The toll booth was modeled using the PTV Vissim micro simulation program. Currently, 8 toll booths are in active service and are operated with barriers. As an alternative to the current operation, 4 different operations were modeled: 8 toll booths without barriers, 10 toll booths without barriers, 12 toll booths without barriers and finally 4 toll booths with free passage system. The designed models were run under 3 different demand levels as low, medium and high, and compared using the PTV Vissim program. When the current barrier toll booth and the non-barrier operations were compared with medium demand, it was seen that there is a significant difference in delay. A bottleneck problem was also encountered due to the geometry of the barrier-free toll booth operation. The optimum operation was found by comparing the alternative operations.
