9 sonuçlar
Arama Sonuçları
Listeleniyor 1 - 9 / 9
Yayın Small molecule desorption from a swelling polymeric glass in polymer solution: Energy transfer method(Elsevier Science Sa, 2005-07-15) Uğur, Şaziye; Pekcan, Mehmet ÖnderDirect energy transfer (DET) method conjunction with fast transient fluorescence (FTRF) technique were used to study small molecule desorption from a swelling poly(methyl methacrylate) (PMMA) glass in polymer solution, which is consist of naphthalene (N)-labeled PMMA chains in chlorofrom-heptane mixture. Desorption coefficients, D-d of pyrene (P) desorbing from the swelling PMMA glass prior to dissolution were measured and found to be 8.3 x 10(-8) and 1.3 x 10(-5) cm(2) s(-1) in short and long time regions, respectively.Yayın Poly (styrene) latex/modified na-activated bentonite nanocomposite films: a fluorescence study(Elsevier Science BV, 2008-12) Uğur, Şaziye; Yargı, Önder; Günister, Ebru; Pekcan, Mehmet ÖnderWe studied film formation of composites of surfactant-free polystyrene (PS) nanoparticles and modified Na-activated bentonite (MLB), by steady state fluorescence (SSF) technique. The films were prepared from a mixture of pyrene (P)-labeled PS particles and MLB at various compositions at room temperature. These films were annealed at elevated temperatures above the glass transition (T(g)) temperature of polystyrene for 10 min. Scattered light (I(S)) and fluorescence intensities (I(P)) from P were measured after each annealing step to monitor the stages of film formation. Evolution of transparency of the composite films was monitored by using photon transmission intensity, I(tr) Atomic force microscopy (AFM) was used to detect the variation in physical structure of annealed composite films. The nanocomposite films exhibited a percolation threshold at 20 wt.% MLB content. Below this fraction two distinct film formation stages were observed which are known as void closure and interdiffusion and above this fraction no film formation was detected. At 0-20 wt.% MLB, minimum film formation, T(0), void closure, T(v) and healing, T(h) temperatures were determined. Void closure and interdiffusion stages were modeled and related activation energies were determined. Void closure activation energies decreased as the percent of MLB increased, no variation was observed in backbone activation energies.Yayın Study on swelling of hydrogels (PAAm) at various temperatures by using fluorescence technique(Springer US, 2007-10) Kaya Aktaş, Demet; Akın Evingür, Gülşen; Pekcan, Mehmet ÖnderSteady-state fluorescence (SSF) technique was employed for studying swelling of polyacrylamide (PAAm) hydrogels. Disc-shaped gels were prepared by free-radical crosslinking copolymerization of acrylamide (AAm) with N, N'- methylenebis (acrylamide) (BIS) as crosslinker in the presence of ammonium persulfate (APS) as an initiator. Pyranine was introduced as a fluorescence probe. Fluorescence intensity of pyranine was measured during in situ swelling process at various temperatures and it was observed that fluorescence intensity values decreased as swelling is proceeded. Li-Tanaka equation was used to determine the swelling time constants, tau(c) and cooperative diffusion coefficients, D-c from intensity, weight and volume variations during the swelling processes. It is observed that swelling time constants, tau(c) decreased and diffusion coefficients, D-c increased as the swelling temperature is increased. The swelling activation energies, Delta E were measured from the intensity, weight and volume variations and found to be 10.7, 32.2 and 64.1 kJ mol(-1), respectively.Yayın Film formation from nano-sized polystrene latex covered with various TiO2 layers(Wiley, 2006-12) Uğur, Şaziye; Sunay, Selin; Elaissari, Abdelhamid; Tepehan, Fatma Zehra; Pekcan, Mehmet ÖnderSteady-state fluorescence technique was used for studying film formation from TiO2 covered nano-sized polystyrene latex particles. The composite films were prepared from pyrene (P)-labeled PS particles by covering them with various layers of TiO2 at room temperature. These films then annealed at elevated temperatures in 10 min time interval above glass transition (T-g) temperature of polystyrene. Five different composite films were studied in various TiO2 layer contents. Fluorescence emission intensity, I-P from P was measured after each annealing step to monitor the stages of film formation. Films present significant increase in I-P above the certain onset temperature called minimum film forming temperature, To. However, at higher annealing temperatures, I-P showed a decrease. Increase and decrease in I-P were modeled by void closure and interdiffusion processes and related activation energies were determined, respectively. Dissolution of annealed PS film, with high TiO2 content presented a nice, ordered nanosized ceramic structure, which may predict the construction of nano-layer photonic crystals.Yayın The effect of clay particles on film formation from polystyrene latex(Wiley, 2006-06) Uğur, Şaziye; Alemdar, Ayşe; Pekcan, Mehmet ÖnderFilm formation from surfactant-free polystyrene (PS) latex was performed in the presence of 5% Na-montmorillonite (NaMMT). The composite films were prepared from pyrene (P)-labeled PS particles at room temperature and annealed at elevated temperatures above the glass-transition (T-g) temperature of polystyrene. Scattered light (I-s) and fluorescence intensity (I-p) from P were measured after each annealing step to monitor the stages of composite film formation. Minimum film formation temperature, T-o, and healing temperatures, T-h, were determined. Void closure and interdiffusion stages were modeled and related activation energies were measured. From these results, it was found that the presence of NaMMT in the PS latex film only affects the minimum film formation, but does not affect the void closure and backbone motion activities.Yayın Film formation from pure and mixed latices; transient fluorescence study(Academic Press Inc Elsevier Science, 2005-11-15) Uğur, Şaziye; Pekcan, Mehmet ÖnderA fast transient fluorescence technique was used to study latex film formation induced by organic solvent vapor. Mixtures of pyrene (P)- and naphthalene (N)-labeled and/or pure naphthalene-labeled latex films were prepared separately from poly(methyl methacrylate) (PMMA) particles. Then these pure and mixed latex films were exposed to vapor of various chloroform-heptane mixtures in seven different experiments. In both films, fluorescence lifetimes from N were monitored during vapor-induced film formation. It was observed that N lifetimes decreased as the vapor exposure time is increased. A Stern-Volmer kinetic analysis was used for low quenching efficiencies to interpret the decrease in N lifetimes. A Prager-Tirrell model was employed to obtain back-and-forth frequencies, v, of reptating PMMA chains during latex film formation induced by solvent vapor. In both pure and mixed latex films, v values were found to be correlated with the chloroform content in the vapor mixture. It was observed that polymer interdiffusion obeyed a t(1/2) law during film formation.Yayın Monitoring small molecule diffusion into hydrogels at various temperatures by fluorescence technique(Elsevier B.V., 2006-12-01) Evingür, Gülşen Akın; Karslı, Kadir; Pekcan, Mehmet Öndersteady state fluorescence technique was used to study small molecule diffusion into polyacrylamide (PAAm) gels at various temperatures. Pyranine (P-y), dissolved in water was introduced as a probe and fluorescence emission (I-p) from Py was monitored during diffusion. Scattered light intensities, I-sc from PAAm gel was also monitored to observe structural variations during diffusion process. Increase in I-P intensity was attributed to P-Y diffusion into PAAm get. On the other hand decrease in I-sc intensity was interpreted as the variation of the spatial heterogeneities in the system. Li-Tanaka and Fickian models were used to quantify the swelling and diffusion experiments and diffusion coefficients were produced in both cases. Related activation energies were also calculated from the corresponding physical processes.Yayın Study of drying of kappa-carrageenan gel at various temperatures using a fluorescence technique(Taylor & Francis Inc, 2008-01) Tarı İlgin, Özlem; Pekcan, Mehmet ÖnderThe steady-state fluorescence technique was used to study drying of kappa-carrageenan gel at various temperatures. Pyranine was doped as a fluorescence probe, and scattered light, I-sc, and fluorescence intensities, I, were monitored during drying of these gels. It was observed that I decreased linearly as drying time is increased. The moving boundary model based on Case II diffusion was applied to produce the packing constants, k(0), at higher temperatures. Activation energy for drying was found to be 53.9 kJ mol(-1). Supporting gravimetric and volumetric measurements were also carried out during drying of gels and the corresponding activation energies were determined to be 46.4 and 58.9 kJ mol(-1), respectively.Yayın Ceramic encapsulated latex composites(Elsevier Inc, 2006-04-15) Uğur, Şaziye; Pehlivan, Esat; Tepehan, Fatma Zehra; Pekcan, Mehmet ÖnderThis work reports the encapsulation of latex particles in Al(2)O(3)-polystyrene (PS) composite films. These films were prepared from PS particles in Al(2)O(3) dispersion at room temperature in various latex contents. Composite films were annealed at elevated temperatures in 10 min time interval above the glass transition temperature (T,,) of polystyrene. Transmitted photon intensities. I(tr) were monitored after each annealing step. AFM micrographs were also used to observe the physical changes of the composite films during annealing. It was observed that latex particles are encapsulated above a critical Al(2)O(3) content of 33 wt% which corresponds to the critical occupation probability of p(c) = 0.33 at which the film obey the site-percolation model with a critical exponent of 0.45. Below pc it was seen that complete latex film formation process took place, where transparency of the film was increased by annealing.
