Künye Makine Mühendisliği Bölümü / Department of Mechanical Engineering için listeleme

Toplam kayıt 79, listelenen: 21-40

      Künye Göre
      Dinçmen, E. (2022). A cooperative neural network control structure and its application for systems having dead-zone nonlinearities. Iranian Journal Of Science And Technology-Transactions Of Electrical Engineering, 46(1), 187-203. doi:10.1007/s40998-021-00475-0 [1]
      Dinçmen, E., Güvenç, B. A. & Acarman, T. (2014). Extremum-seeking control of ABS braking in road vehicles with lateral force improvement. IEEE Transactions on Control Systems Technology, 22(1), 230-237. doi:10.1109/TCST.2012.2229465 [1]
      Ertaş, A. H., Vardar, Ö., Sönmez, F. O. & Solim, Z. (2009). Measurement and assessment of fatigue life of spot-weld joints. Journal of Engineering Materials and Technology, Transactions of the ASME, 131(1), 1-11. doi:10.1115/1.3030941 [1]
      Güçsav, B. B., Çoker, D., Yeşilyaprak, C., Keskin, O., Zago, L. & Yerli, S. K. (2016). Agile development approach for the observatory control software of the DAG 4m telescope. Paper presented at the Proceedings of SPIE - The International Society for Optical Engineering, 9913, 1-8. doi:10.1117/12.2234394 [1]
      Güneş, M. & Kaya, O. (2012). Joint decode/compress and forward based cooperative multiple access. Paper presented at the 2012 20th Signal Processing and Communications Applications Conference (SIU), 1-4. doi:10.1109/SIU.2012.6204821 [1]
      Güver, T., Mazin, B. A., O'Brien, K., Kay, B., Aliş, S., Yelkenci, F. K., Yeşilyaprak, C., Erol, A., Yerli, S. K. & Keskin, O. (2016). A microwave kinetic inductance detector for the DAG telescope. Paper presented at the Proceedings of SPIE - The International Society for Optical Engineering, 9915, 1-8. doi:10.1117/12.2234281 [1]
      Humayun, M. H., Khan, I., Azeem, F., Chaudhry, M. R., Gökay, U. S., Murib, M. S. & Serpengüzel, A. (2018). Far-infrared elastic scattering proposal for the avogadro project's silicon spheres. Journal of Quantitative Spectroscopy and Radiative Transfer, 210, 173-179. doi:10.1016/j.jqsrt.2017.12.023 [1]
      İlikan, A. N. & Ayder, E. (2019). Effect of the computational domain selection on the calculation of axial fan performance. Paper presented at the Open Archives of the 16th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC 2016, 1-8. [1]
      Jolissaint, L., Eikenberry, S. S., Bouxin, A., Keskin, O. & Yeşilyaprak, C. (2017). The flexible adaptive optics concept. Paper present at the Adaptive Optics for Extremely Large Telescopes, 2017 AO4ELT5, 2017-June, 1-7. doi:10.26698/AO4ELT5.0118 [1]
      Jolissaint, L., Keskin, O., Zago, L., Yerli, S. K., Yesilyaprak, C., Mudry, E. & Lousberg, G. (2016). The design of an adaptive optics telescope: The case of DAG. Paper presented at the Proceedings of SPIE - The International Society for Optical Engineering, 9906, 1-13. doi:10.1117/12.2233297 [1]
      Jolissaint, L., Zago, L. & Keskin, O. (2020). Observing with DAG: performance metrics of imaging and spectroscopy. Turkish Journal of Astronomy and Astrophysics, 1(1), 83-83. [1]
      Karagüzel, U. & Budak, E. (2018). Investigating effects of milling conditions on cutting temperatures through analytical and experimental methods. Journal of Materials Processing Tech, 262, 532-540. doi:10.1016/j.jmatprotec.2018.07.024 [1]
      Karagüzel, U. (2019). Ti6Al4V Alaşımının talaşlı imalatı sırasında termal kamera ile sıcaklık ölçümü ve sonlu elemanlarla modellenmesi. Mühendislik Bilimleri ve Tasarım Dergisi, 7(2), 265-271. doi: 10.21923/jesd.434370 [1]
      Karagüzel, U. (2021). Transient multi-domain thermal modeling of interrupted cutting with coated tools. International Journal of Advanced Manufacturing Technology, 116(1-2), 345-361. doi:10.1007/s00170-021-07388-6 [1]
      Karagüzel, U., Bakkal, M. & Budak, E. (2017). Mechanical and thermal modeling of orthogonal turn-milling operation. Paper presented at the 16th CIRP Conference on Modelling of Machining Operations, 58, 287-292. doi:10.1016/j.procir.2017.03.191 [1]
      Karagüzel, U., Bakkal, M. & Budak, E. (2017). Modelling thermally induced deformations on tool during turn-milling. Journal of the Faculty of Engineering and Architecture of Gazi University, 32(3), 865-875. doi:10.17341/gazimmfd.337635 [1]
      Karagüzel, U., Kuzu, A. T., Korap, V., Çilingir, H. & Bakkal, M. (2020). Sıcak dövme kalıplarına infrared (kızılötesi) yöntemi ile ön ısıtma uygulanmasına yönelik deneysel ve teorik analiz. Makina Tasarım ve İmalat Dergisi, 18(1), 9-23. [1]
      Karpat, Y., Karagüzel, U. & Bahtiyar, O. (2020). A thermo-mechanical model of drill margin-borehole surface interface contact conditions in dry drilling of thick CFRP laminates. International Journal of Machine Tools and Manufacture, 154, 1-15. doi:10.1016/j.ijmachtools.2020.103565 [1]
      Kayihan, M. & Karagüzel, U. & Bakkal, M. (2021). Experimental analysis on drilling of Al/Ti/CFRP hybrid composites. Materials and Manufacturing Processes, 36(2), 215-222. doi:10.1080/10426914.2020.1819545 [1]
      Keskin, O. & Jolissaint, L. (2020). Adaptive optics for DAG telescope. Turkish Journal of Astronomy and Astrophysics, 1(1), 93-93. [1]