Yayın tarihi için MF - Makale Koleksiyonu | İnşaat Mühendisliği Bölümü / Civil Engineering listeleme
Toplam kayıt 40, listelenen: 21-40
-
Behaviour of steel cushions subjected to combined actions
(Springer, 2018-02)Mild steel is relatively low-cost and easily accessible material to fabricate some structural members. It would be a significant advantage if seismic energy dissipaters that are used in structures constructed in the ... -
Uni-axial behavior of energy dissipative steel cushions
(Techno Press, 2018-06-25)Seismic excitations may impart a significant amount of energy into structures. Modern structural design attitudes tend to absorb some part of this energy through special dissipaters instead of heavy plastic deformations ... -
Precursors of instability in a natural slope due to rainfall: a full-scale experiment
(Springer Heidelberg, 2018-09)A full-scale landslide-triggering experiment was conducted on a natural sandy slope subjected to an artificial rainfall event, which resulted in mobilisation of 130m(3) of soil mass. Novel slope deformation sensors (SDSs) ... -
Compressive spectral renormalization method
(Işık University Press, 2018-09-09)In this paper a novel numerical scheme for finding the sparse self-localized states of a nonlinear system of equations with missing spectral data is introduced. As in the Petviashivili's and the spectral renormalization ... -
FCC-EE: The lepton collider: Future circular collider conceptual design report volume 2
(Springer Heidelberg, 2019-06)In response to the 2013 Update of the European Strategy for Particle Physics, the Future Circular Collider (FCC) study was launched, as an international collaboration hosted by CERN. This study covers a highest-luminosity ... -
FCC Physics Opportunities: Future Circular Collider Conceptual Design Report Volume 1
(Springer, 2019-06-05)We review the physics opportunities of the Future Circular Collider, covering its e(+)e(-), pp, ep and heavy ion programmes. We describe the measurement capabilities of each FCC component, addressing the study of electroweak, ... -
Cyclic behavior of reinforced concrete cladding panels connected with energy dissipative steel cushions
(Elsevier Ltd, 2019-06-15)Precast concrete structures show damage after the destructive earthquakes and indicate that the connections of reinforced concrete (RC) cladding panels might be inadequate. RC cladding panels greatly increase the lateral ... -
FCC-HH: The hadron collider: future circular collider conceptual design report volume 3
(Springer Heidelberg, 2019-07-01)In response to the 2013 Update of the European Strategy for Particle Physics (EPPSU), the Future Circular Collider (FCC) study was launched as a world-wide international collaboration hosted by CERN. The FCC study covered ... -
HE-LHC: The high-energy large hadron collider future circular collider conceptual design report volume 4
(Springer Verlag, 2019-07-01)In response to the 2013 Update of the European Strategy for Particle Physics (EPPSU), the Future Circular Collider (FCC) study was launched as a world-wide international collaboration hosted by CERN. The FCC study covered ... -
Numerical modelling of energy dissipative steel cushions
(Korean Soc Steel Constructiın-KSSC, 2019-08)Energy dissipative steel cushions (EDSCs) are simple units that can be used to join structural members. They can absorb a substantial amount of seismic energy due to their geometric shapes and the ductile behavior of mild ... -
Pros and cons of using building information modeling in the AEC industry
(ASCE-AMER Soc Civil Engineers, 2019-08-01)Although a plethora of studies on building information modeling (BIM) have been conducted in the last decade, none of the previous studies collate and/or prioritize the benefits, risks, and challenges of BIM based on the ... -
An automatic calibration procedure of driving behaviour parameters in the presence of high bus volume
(Faculty of Transport and Traffic Engineering, 2019-11)Most of the microscopic traffic simulation programs used today incorporate car-following and lane-change models to simulate driving behaviour across a given area. The main goal of this study has been to develop an automatic ... -
Pedestrian crossing behavior at midblock crosswalks
(Elsevier Ltd, 2019-12)Introduction: This study investigated the pedestrian crossing behavior at midblock crosswalks, in Istanbul. Method: Data were compiled from field studies at four selected crosswalks that were on one-way streets. Three of ... -
Progressive damage analyses of masonry buildings by dynamic analyses
(Springer International Publishing AG, 2020-08)This study investigates the effects of prescribed damage on the walls of masonry buildings by experimental and numerical methods. Ambient vibration survey method was applied to an existing, two-story, unreinforced masonry ... -
FORSAT: a 3D forest monitoring system for cover mapping and volumetric 3D change detection
(Taylor and Francis Ltd., 2020-08-02)A 3D forest monitoring system, called FORSAT (a satellite very high resolution image processing platform for forest assessment), was developed for the extraction of 3D geometric forest information from very high resolution ... -
A split-step Fourier scheme for the dissipative Kundu-Eckhaus equation and its rogue wave dynamics
(Işık University Press, 2021-01)We investigate the rogue wave dynamics of the dissipative Kundu-Eckhaus equation. With this motivation, we propose a split-step Fourier scheme for its numerical solution. After testing the accuracy and stability of the ... -
Investigation of the relationship between upstream and on-ramp flows at downstream capacity level on Istanbul freeway merges
(Muğla Sıtkı Koçman Üniversitesi Fen Bilimleri Enstitüsü, 2021-03-04)Traffic congestion usually occurs at freeway merges due to the inequality of lane numbers at upstream and downstream. The freeway entry, defined as on-ramp, is the main cause of this irregularity and in order to clarify ... -
Improvement of seismic performance of precast frames with cladding panels fastened by energy dissipative steel cushions
(Springer, 2021-09)Precast reinforced concrete panels are commonly used as wall claddings in precast buildings. The cladding panels are generally evaluated as non-structural members and are joined to structural systems via mechanical, welding, ... -
Strengthening of reinforced concrete beams without transverse reinforcement by using intraply hybrid composites
(Elsevier Ltd, 2021-12)Concrete is currently among the most widely used materials all around the world. The main advantages of concrete include durability, versatility, and high compressive strength, but significant disadvantages include low ... -
Analysis of the benefits, challenges and risks for the integrated use of BIM, RFID and WSN: a mixed method research
(Emerald Group Publishing Ltd, 2023-07-11)Purpose The purpose of this study is to identify, classify and prioritize the benefits, challenges and risks for the integrated use of building information modeling (BIM), radio frequency identification (RFID) and wireless ...